Сервисное руководство по ремонту и техническому обслужвианию автомобиля Infiniti G20 начиная с 2001 года выпуска, так же в архиве есть подробные электросхемы.
Язык: английский
Формат: PDF
Размер: 29.64 Mb
Язык: английский
Формат: PDF
Размер: 29.64 Mb
LOW BEAM OPERATION
3003201521_43
When the lighting switch Is turned to the 2ND position and placed in LOW ("B") position, power is supplied
• from lighting switch terminal 10
• to terminal 3 of the LH headlamp, and
• from lighting switch terminal 7
• to terminal 3 of the RH headlamp.
Terminal 2 of each headlamp supplies ground through body grounds E9 and E28.
With power and ground supplied, the headlamp(s) will illuminate.
HIGH BEAM OPERATION/FLASH-TO-PASS OPERATION
When the lighting switch is turned to the 2ND position and placed in HIGH ("A") position or PASS ("C") position,
power is supplied
• from lighting switch terminal 6
• to terminal 1 of the RH headlamp, and
• from lighting switch terminal 9
• to terminal 1 of the LH headlamp, and
• to combination meter terminal 29 for the high beam indicator.
Ground is supplied to terminal 27 of the combination meter through body grounds M15, M71 and M76.
Terminal 2 of each headlamp supplies ground through body grounds E9 and E28.
With power and ground supplied, the high beams and the high beam indicator illuminate.
When the lighting switch Is turned to the 2ND position and placed in LOW ("B") position, power is supplied
• from lighting switch terminal 10
• to terminal 3 of the LH headlamp, and
• from lighting switch terminal 7
• to terminal 3 of the RH headlamp.
Terminal 2 of each headlamp supplies ground through body grounds E9 and E28.
With power and ground supplied, the headlamp(s) will illuminate.
HIGH BEAM OPERATION/FLASH-TO-PASS OPERATION
When the lighting switch is turned to the 2ND position and placed in HIGH ("A") position or PASS ("C") position,
power is supplied
• from lighting switch terminal 6
• to terminal 1 of the RH headlamp, and
• from lighting switch terminal 9
• to terminal 1 of the LH headlamp, and
• to combination meter terminal 29 for the high beam indicator.
Ground is supplied to terminal 27 of the combination meter through body grounds M15, M71 and M76.
Terminal 2 of each headlamp supplies ground through body grounds E9 and E28.
With power and ground supplied, the high beams and the high beam indicator illuminate.