0410201508_56
Note
• When only the front or rear wheels are rotated on a chassis dynamometer or equivalent, the DSC CM
determines that there is a malfunction in the DSC and illuminates the following lights:
— ABS warning light
— Brake system warning light
— DSC indicator light
• When only the front or rear wheels are rotated on a chassis dynamometer or equivalent, the DSC CM
determines that there is a malfunction in the DSC and illuminates the following lights:
— ABS warning light
— Brake system warning light
— DSC indicator light
• If the above lights are illuminated, dismount the vehicle from the chassis dynamometer and turn the
ignition switch to the LOCK position. Then, turn the ignition switch back to the ON position, run the vehicle
at 10 km/h or more and verify that the warning lights go out. In this case, a DTC will be stored in the
memory. Clear the DTC from the memory by following the memory clearing procedure [DSC] in the on-
board diagnostic system. (See04-02-3 ON-BOARD DIAGNOSIS.)
Очень подробно иллюстрирован, содержит каталог запасных частей.
Год издания: 2007
Год издания: 2007
Формат: pdf
Издат.: Mazda Motor Corporation
Страниц: 1772
Размер: 38
Язык: Английский
Издат.: Mazda Motor Corporation
Страниц: 1772
Размер: 38
Язык: Английский